SPDT 12VDC 10A Relay Module

$2$3

Updated: 24/08/2021

Clear
SKU: MODULE-001 Categories: , Tag:

Description

Relay plays an important role in automatic systems. Mini Relay module can be used in many system.

1.Specifications

- Dimension: 50×30mm.

- Voltage of controller: 3.3V÷5V.

- Voltage of relay: 12V.

- Type of relay: 220V – 10A.

Figure 1: Dimension of board

2.Notations

Input:

- VLR: Voltage of relay.

- VCC: Voltage of controller.

- CTRL: Control signal.

- GND: Ground.

Output:

- NC: Normally Closed.

- NO: Normally Open.

- COM: Common terminal

Indicators:

- POWER: Indicate power supply.

- SIGNAL: Indicate control signal. Control signal is high level, SIGNAL LED turns off. Control signal is low level, SIGNAL LED turns on.

Figure 2: Operating principle of relay module
When control signal is low level, diode in U1 enables, U1 operates. U1 allows the current to pass through, the transistor Q1 is in saturation mode, and relay switches its status from “NC” to “NO”. LED LD1 turns on. When control signal is high level, diode in U1 disables, U1 doesn’t operate. U1 permits the current to pass through, the transistor Q1 is in cutoff mode, and relay is in normal mode “NO”. LED LD1 turns off.

Additional information

Design Files (Altium Designer)

Schematic Design & Library, Full Design & Library

Reviews

There are no reviews yet.

Be the first to review “SPDT 12VDC 10A Relay Module”